02 SENSORS NOT WORKING. CHECKED CODES AND FOUND CODES FOR ALL FOUR SENSORS STORED IN SYSTEM. PULLED SCHEMATIC AND FOUND ALL FOUR SHARE A COMMON POWER SOURCE. CHECKED FUSES AND FOUND FUSE BLOWN FOR O2 SENSORS. REPLACED FUSE AND FUSE BLEW IMMEDIATELY. TRACED WIRES BACK TO O2 SENSORS AND FOUND RIGHT FRONT O2 SENSOR CONNECTOR COVERED IN OIL. UNPLUGGED SENSOR AND REPLACED FUSE AND FUSE IS OK. REPLACED VALVE COVER GASKETS AND O2 SENSOR.
BLOWER MOTOR ASSEMBLY – Remove & Replace
VALVE COVER GASKET – Remove & Replace – Both Sides
INSPECT ALL FOUR WHEELS INCLUDES; FRONT PADS, ROTORS REAR SHOES, WHEEL CYLINDERS AND ALL BRAKE LINES
SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both Sides – [DOES NOT include disassemble or alignment.]
Replace rear brake pad linings. Resurface both rear rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle.
Replace front brake pad linings. Resurface both front rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Road test vehicle.
TERRY S. gave our service a 5 star review on 2/25/2022
A/C COMPRESSOR – Remove & Replace – In-Line4 – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
Evacuate and Recharge AC System. Pull vacuum on system and check for leaks. Check condition of all belts and lines and recharge with R-134. Test system performance.
HOWARD S. gave our service a 5 star review on 1/21/2022
Replace front brake pad linings. Resurface both front rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Road test vehicle.
Replace rear brake pad linings. Resurface both rear rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle.
CORRY V. gave our service a 5 star review on 9/22/2021